车间需要的一切

ATE 专用工具

  • Home
  • 产品
  • 15 liter electrical brake bleeding unit - FB 15

15 liter electrical brake bleeding unit - FB 15

项目编号
03.9302-1650.4
740229

The new ATE FB 15 is an electrically operated bleeder with a capacity of 15 liters of brake fluid. It has a particularly robust construction. With the wide range of ATE accessories, all hydraulic clutch and brake systems - including ABS, EDS or ESP - can be filled, flushed and bled. The pump of the ATE FB 15 is sufficiently powerful to be used on truck transmission control systems. A low-pressure leakage test of a brake or clutch system can be easily carried out with the ATE FB 15. Only one person is needed to operate the ATE FB 15.

Its large casters and the convenient steering handle allow it to be moved easily. Practical holders are provided on the unit for the filling hose, the power cable and for four ATE bleeding unit adapters. The clearly-arranged control elements make the ATE FB 15 easy to operate. The fluid-level indicator allows you to check the amount remaining in the brake fluid tank. If it is necessary to top up the brake fluid, this can be done while the unit is running, because the ATE FB15 does not need to be bled again. If there is insufficient brake fluid in the unit, the pump is automatically switched off, a clear warning signal sounds, and no air can be drawn in. The working pressure can be adjusted by a pressure regulator that is protected against inadvertent adjustment and can be monitored with the working-pressure manometer. At 3.5 meters, the length of the filling hose is sufficient for all requirements.
It goes without saying that all materials used on the FB 15 are completely resistant to brake fluid.

The ATE FB 15 is fitted with a bleeding spigot No.: 20 (Europe spigot).

价格:
根据要求

优点

  • Well-proven, particularly robust unit for workshop use

交货

  • Unit complete
  • Operating instructions
  • Bleeding spigot No.: 20 (Europe spigot)

技术规范

Brake fluid capacity: 15 liters
Power supply: 230 V ~ , 50-60 Hz
Delivery rate of pump: 1.3 l/min
Working pressure: 2 bar (0 to 3 bar adjustable)
Automatic cut-off of pump: at approx. 9 mm remaining fluid level
Length of connecting cable: 4.20 m
Filling hose length: 3.5 m
Dimensions: H x W x D : 745 x 380 x 705 mm
Weight: 20.5 kg
Noise level 66 dB(A)